Updating firmware
This is a tool to fix firmware related issues with your VolumeMaster. It only works for more recent VolumeMasters, contact support if you have any issues or an older device and we will get you sorted.
1) Download and extract Unzip the download, then double-click VolumeMaster-Updater.exe.
Windows may show "Windows protected your PC". If so, click "More info", then "Run anyway".
2. Check that "Device port" shows your device. It usually appears as
"USB-SERIAL CH340". If you have more than one, choose the VolumeMaster.
3. Click "Update Firmware".
4. If VolumeMaster is open, you will be asked to close it. Click "Yes".
5. Wait for the update to finish. This should take about a minute or less.
DO NOT unplug the device or turn off your PC during the update.
6. You will be asked to unplug and re-plug the device after the update has completed. Do this, then you can open VolumeMaster again and continue using your device.
If you have any problems during this process please reach out to customer support.